ALL DECALS- UV DTF CUP WRAP TRANSFERS (16 OUNCE LIBBEY CUPS)

ALL DECALS CAN BE PURCHASED SEPARATELY.

Our UV DTF Transfers measures 9.5"x3.95-4.52"

Personalize your OWN cup, mug and more with one of our many UV DTF CUP WRAP Transfers.

*you can also order blank cups or mugs separately.

If you want us to add a transfer to one of our blank cups or mugs, both the transfer and blank cup must be added to the cart. 

If there is multiple transfers and cups a note is needed identifying what goes on what. 

These transfers can be used on almost any hard, smooth, non-porous surface, like glass, metal (stainless steel, aluminum), ceramics (mugs, tiles), plastics (acrylic, phone cases), sealed wood, and even car surfaces creating durable, vibrant decals perfect for drink ware and promo items, decor and outdoor use. 

Note that UV DTF Transfers are sticker like, designs are created and printed with UV curable inks onto a special film laminating it. When using our UV DTF Transfers please remember although it is water resistant it should be handwashed only.

Step-by-Step Application:

Prepare the Surface: 
Clean the hard surface (glass, metal, wood) with rubbing alcohol and a lint-free cloth to remove dust, oil, and residue, then let it dry completely. 

Position the Transfer: 
Carefully peel the clear transfer film from the paper backing, keeping the design flat. Align the design on your surface, but don't press it down yet. 

Burnish (Press):
Start from the center or one edge, applying firm, even pressure with a squeegee or soft cloth to push out air and secure the adhesive. 

For curves, use a flexible squeegee and gentle heat to help it conform. 

This is a permanent bond, so get it right the first time!

Peel the Film: 
Slowly peel the clear top film back at a low angle (close to the surface). If any part of the design lifts, press it back down and re-burnish before continuing. 

Final Burnish: 
Once the clear film is removed, burnish the design one last time to ensure maximum adhesion.